Dell PowerVault 110T DLT1 Manual page 11

4. Launch Backup Exec 12.5 and install the correct number
of Library Expansion Option licenses to support the
PowerVault Tape Library.
5. On the navigation bar, click Devices.
6. Select the robotic library.
7. Click Inventory. The tape library will inventory each
cartridge within the library. This process could take
several minutes depending on the number of cartridges
in the library.
Cataloging Media from a Migrated Tape Library
The tape media must be cataloged once the PowerVault Tape
library has completed the inventory process. Cataloging the tape
media allows Backup Exec to read and store the information
contained in the tape media catalog which includes:
• Tape number/label/name (something to identify that
tape from all others)
• Date and time of the backup
• Type of backup
• What directories/files were backed up
Perform the following steps to catalog the tape media in the
library:
1. Click the tape drive/robotic library.
2. Select the slots containing the tape media that was just
imported.
3. Right-click the tapes/slots and select
Copying data sets
Media Migration
Catalog.
11