Dell PowerVault 110T DLT1 Manual page 15

the Clear command for the migrated Disk Group.
7. 7. Using OMSA, perform a
the imported virtual disks and then delete any imported
virtual disks.
8. 8. On the target PowerVault DL Appliance, reset the
Configuration Policy to one of the Automatic settings
via the Appliance Management Console. Backup Exec
will then configure the imported Disk Group(s) as one or
more virtual disks and make them available for use by the
PowerVault DL Appliance.
Summary
The need to migrate or copy backup data from one
Dell PowerVault DL Appliance to another is handled via
straightforward processes and procedures. Depending on the
appliance configuration, this data may reside on disk, tape,
or both. The procedures contained herein provide a direct
methodology to accomplish the aforementioned tasks.
Media Migration
Fast Initialization on each of
Disk
15