Stove Cavity Assembly - Desa MSVFBNR Series Owner's Operation And Installation Manual

SUN VALLEY STOVE COMPANY
VENT-FREE NATURAL GAS STOVE HEATER
INSTALLATION
Continued

STOVE CAVITY ASSEMBLY

1. Lift off corrugated box enclosing stove
body crating.
2. Remove all screws fastening the wood
frame enclosure. Spread wood frame open
and lift away from plastic-bagged stove
body. The bottom pieces of pallet wood
will remain bolted to the stove body.
3. Remove plastic bag from stove body.
4. Remove back panel from stove (see
Figure 5). Use an adjustable wrench or
a 10 mm socket. Remove six (6) bolts
and washers. Keep bolts and washers
to reattach back panel later.
5. Remove all contents from inside stove
cavity. Contents include:
(1) - Stove bottom
(4) - Legs (includes leg leveler bolts)
(1) - Bottom door
(1) - Top grate
(1) - Hardware kit bag with fasteners
6. Carefully lay stove body on back to at-
tach bottom components to stove body
(see Figure 6). Rest stove on drop cloth or
blanket to avoid scratching stove edges.
7. Remove remaining pallet wood attached
to bottom of stove body (see Figure 7).
Use an adjustable wrench to remove bolts.
CAUTION: Cast iron is brittle.
Do not overtighten bolts or
screws during assemlby.
8. Fasten each leg to stove with four (4)
M8 x 1.25 - 20mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figures 8 and 9). Use
an adjustable wrench or a 12mm socket.
9. Fasten stove bottom to stove with four
(4) M6 x 1 - 25mm bolts. Use a flat
washer and lock washer with each bolt.
Tighten bolts into threaded holes on
stove body (see Figures 8 and 10). Use
an adjustable wrench or a 10mm socket.
For more information, visit www.desatech.com
Product Identification
Label
Figure 5 - Removing Back Panel
Front of
Stove Unit
Drop Cloth/
Blanket
Figure 6 - Laying Down Stove On Side
Bolt
Pallet
Wood
Figure 7 - Removing Pallet Wood From The Bottom of The Stove
Door Hinge Step
Bolt Hole
Leg
Hole
Leg
Hole
Figure 8 - Locating Threaded Holes for Stove Bottom, Legs, and Door Attachment
8
Bolt
Back Stove
Panel
Top of Stove Unit
Front of
Stove Unit
Pallet Wood
Bolted to
Stove Body
Bottom
Front
Front
Stove
Bottom
Hole
Top of
Stove
Unit
Pallet
Wood
Bottom Of
Stove Unit
Door Catch Bolt
With Adjustable
Hex Nuts Hole
Leg
Hole
Bottom Of
Stove Unit
Leg
Hole
105985