Table of Contents
Advertisement
Global Properties screen
The Global Properties screen enables you to change the global scope settings. To access the Global Properties
screen, press the Alt+N key combination while on the Adapter List screen.
Table 2
Global properties field descriptions
Field
Pause when Boot
Alert Displayed
Boot information
display mode
Support interrupt
Restore Defaults
When you have finished on the Global Properties screen, you can:
Return to the Adapter List screen by pressing the Alt+N key combination (this combination toggles between
the Adapter List screen and the Global Properties screen).
Access the Exit Menu screen by pressing the Esc key.
Description
This option specifies whether the BIOS pauses for user acknowledgement after displaying an alert
message during the boot process. To continue after displaying a message, select No. To wait for the
user to press a key, select Yes.
This option controls how much information the BIOS displays about adapters and devices during the
boot process. Possible values are:
Display adapters only
Display adapters and all devices
Display minimal information
Display adapters and installed devices
This option enables you to prevent a hook on INT40, if required. Possible values are:
Hook interrupt (default)
Bypass interrupt hook
If you press the Enter key while this field is selected, the values in the other fields on this screen revert
to their default settings.
SAS BIOS configuration utility 9
Advertisement
Table of Contents
