MACROMEDIA FLASH MEDIA SERVER 2-SERVER MANAGEMENT ACTIONSCRIPT LANGUAGE Reference page 61

If the call fails, the server sends a reply information object with a
and a property of
code
available. Some objects might also have a
describing the cause of the failure.
Description
Restarts a virtual host that is currently running. Restarting a virtual host disconnects all
connected users, unloads all currently loaded applications, and reloads the configuration files
for that virtual host.
If you make changes to the configuration files for a virtual host, you can use this command to
restart the virtual host without restarting the server.
Users must reconnect each time you restart a virtual host. Before using this command, you
might want to take steps to notify connected users.
Virtual host administrators can only restart the virtual hosts to which they are connected.
You must be a server administrator to start a virtual host other than the one to which you're
connected.
To start a virtual host that is stopped, use the
server administrator to perform this command.
Example
The following example shows a call to restart the connected virtual host and then a call to
restart a specified virtual host
/* Restart the connected virtual host */
nc.call("restartVHost", new onRestartVHost());
/* Restart the virtual host tree.oak.com on the default adaptor. */
nc.call("restartVHost", new onRestartVHost(), "_defaultRoot_/
tree.oak.com");
See also
,
reloadApp() startVHost()
NetConnection.Admin.Command.Failed
description
tree.oak.com
,
stopVHost()
level
property that contains a string
command. You must be a
startVHost()
on the default adaptor:
property of
error
or a more specific value, if
restartVHost() 61