Create Two Objects From The Product Class - MACROMEDIA FLASH 8-FLASH Tutorials Manual

Create two objects from the
Product class
You'll create a new FLA file, and then create two objects from the
Product class.
1. Open a new Flash document and save it in the same location where you
saved Product.as.
2.
In the new document, select Frame 1 in the Timeline.
3.
In the Actions panel, create two objects from the Product class using the
data shown in the following table (the ActionScript that you'll create
appears after the table).
Instance
name
pedals
handleBars
4. Verify that you created the objects as follows:
var handleBars:Product = new Product (1, "ATB",
"Available in comfort and aero design");
var pedals:Product=new Product(0,"Clipless
Pedals","Excellent cleat engagement");
5.
Trace the description property of pedals:
trace (pedals.getDescription ());
6.
Save and test the document.
You should see the description of pedals in the Output panel.
A finished sample file of the document you just created, named
handson2.fla, is located in your finished files folder. For the path, see
up your workspace" on page
Data
id 0
prodName Clipless Pedals
description Excellent cleat engagement
id 1
prodName ATB
description Available in comfort and aero
design
256.
"Set

Create two objects from the Product class 263