Draw With The Line Tool; Select And Add A Different Fill Color - MACROMEDIA FLASH 8-FLASH Tutorials Manual

150 Creating Graphics: Draw in Flash
3. Press Shift+Alt and drag down slightly to drag a copy of the three lines,
as in the following illustration:

Draw with the Line tool

The Line tool allows you to draw straight lines in any direction.
In the Tools panel, select the Line tool. On the Stage, draw four vertical
lines from the hexagon to the stroke copies that you dragged down, as
shown in the following illustration:
Select and add a different fill
color
You can use the Paint Bucket tool to change an existing color and to fill
empty areas surrounded by lines. You'll use the Paint Bucket tool to add a
fill color to the empty areas of your drawing.
1. In the Tools panel, select the Paint Bucket tool. In the colors area, click
the Fill Color control and select blue with the hexadecimal value of
#3366FF.
2. On the Stage, click within the lines to add the selected color to the
empty areas, as shown in the following illustration: