Advertisement

Owner's Manual
The Pentair PUV-7 and PUV-14 UV systems are designed to provide you with years of
trouble-free operation with minimal maintenance required.
KEY INFORMATION YOU SHOULD KNOW:
A 5-micron (nominal) sediment filter must be installed upstream of (before) any UV system.
For indoor use only. Keep all components clean and dry.
Clean the sleeve regularly for optimum performance.
Not for use in salt water applications.
Date of installation:
Installed by:
Installer phone #:
Serial #:
(Found on label on side of Power Supply)
© Pentair
2395 Apopka Blvd. | Apopka, FL 32703
Models
: PUV -7
PUV -14
520110_RevN
877-842-1635
www.pentair.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UV MAX PUV-14 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Safety Information
Potential Hazards
Identifies potential dangers associated with the UV system and its components.
Safety Precautions
Outlines critical steps and warnings to prevent injury or equipment damage during use.
Water Chemistry Recommendations
Details recommended water quality parameters for optimal UV system performance.
Installation Guide
UV Disinfection System Installation
Provides step-by-step instructions for installing the UV disinfection system unit.
Plumbing System Disinfection
Details the process for chemically disinfecting the plumbing system after UV unit installation.
Maintenance Procedures
UV Lamp Replacement
Step-by-step guide for replacing the UV lamp to ensure continued disinfection efficacy.
Sleeve Cleaning and Replacement
Instructions for cleaning or replacing the quartz sleeve to maintain UV light transmission.
System Operation
UV Sensor Cleaning and Replacement (if applicable)
Procedures for cleaning or replacing the UV sensor for accurate system monitoring.
Basic System Operation (BA-ICE-C/CL)
Information on operating basic UV systems with specific power supply models.
Plus System Operation (BA-ICE-CM)
Information on operating advanced UV systems with specific power supply models.

Table of Contents