Download Print this page

Aesculap GA800 Instructions For Use/Technical Description

Hide thumbs

Table Of Contents

Table of Contents

Table of Contents
About this Document
Scope
Warnings
General Information
Intended Use
Application Environment
Indications
Contraindications
Safe Handling
Product Description
Scope of Supply
Components Required for Operation
Operating Principle
Control Unit
Display/Control Concept
Explanation with an Example
Applied Part Types
Identification of Control Elements on System Components
Recognition of Connected Motor Cable and Applied Part
Overload Protection
Coolant and Irrigation Pump
Preparation and Setup
Set-Up Environment/Set-Up Location
Stacking of Units
Working with the ELAN 4 Electro System
System Set-Up
Connecting the Power Supply
Switching on the Control Unit
Switching off the Control Unit
Putting out of Operation
Connecting the ELAN 4 Electro to Wireless Foot Control GA810
Connecting the ELAN 4 Electro Foot Control GA808 to the Control Unit
Connecting the ELAN 4 Electro Motor Cable GA804/GA805/GA806 or ELAN 4 Electro Drill Tool GA844 to Control Unit
Connecting the ELAN 4 Electro Single-Use Tube Set GA395SU
Connecting the Applied Part to the Motor Cable
Releasing the Applied Part for Operation ("On" Position)
Locking the Applied Part ("Off" Position)
Disconnecting the Applied Part from the Motor Cable
Disconnecting the ELAN 4 Electro Foot Control GA808 from the Control Unit
Disconnecting the ELAN 4 Electro Motor Cable GA804/GA805/GA806 or ELAN 4 Electro Drill Tool GA844 from Control Unit
Function Checks
Safe Operation
Activating the Motor/Pump Control Panel
Changing the Maximum Speed Setting/Rotational Direction of
The Applied Part
Activating the Coolant and Irrigation Pump/"Flush" Function (Continuous Flushing)
Deactivating the Coolant and Irrigation Pump and Changing the Delivery Rate
Enable Application Part Using Foot Control GA808 or Wireless Foot Control GA810
Activating the Applied Part Via Hand Control GA804/GA805
Activating the Coolant Pump Via Foot Control
System Settings Menu
User Profiles
Motor Settings
Device Settings
Wireless Foot C1Ontrol
Device Information
Reprocessing Procedure
General Safety Notes
Reusable Products
Preparation before Cleaning
Cleaning/Disinfection
Product-Specific Safety Instructions for the Reprocessing Procedure
Wipe Disinfection for Electrical Equipment
Inspection, Maintenance and Checks
Maintenance
Troubleshooting List
Display Error Messages
System Error
Accessory Error
Operating Error
Other Faults in Control Unit
Faults When Working with the Applied Part
Fuse Replacement
Technical Service
Accessories/Spare Parts
ELAN 4 Electro Motor Cables, Applied Parts and Foot Controls
Coolant and Irrigation Pump
Power Cord
Equipotential Bonding Leads
Spare Parts
Technical Data
Classification According to Directive 93/42/EEC
Performance Data, Information about Standards
Ambient Conditions
Disposal
Distributor in the Us/Contact in Canada for Product Information and Complaints

Quick Links

1 Table of Contents
2 Technical Data
Download this manual

AESCULAP

USA

Instructions for use/Technical description

ELAN 4 electro control unit GA800

Document No.: IFU - Version: 3.0 - Document ID: SOP-AIC-5001568 Date/Time Printed/Viewed: 2022-04-13 15:59 (CET)

Effective

Table of Contents

Need help?

Do you have a question about the GA800 and is the answer not in the manual?

Aesculap GA800 Instructions For Use/Technical Description

Quick Links

Need help?

Questions and answers

Related Manuals for Aesculap GA800

Table of Contents