Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TBB power BS1240-3
Summarization of Contents
Disclaimer and Manual Overview
Disclaimer
Text regarding warranty, accuracy, and liability for the information provided.
About this Manual
Outlines the manual's purpose: describing product features and installation procedures.
General Instruction
Expresses gratitude and highlights the chapter's important safety and operation instructions.
General Safety Information
Safety Precautions
Crucial safety guidelines for charger operation, wiring, battery handling, and maintenance.
Introduction to BS Smart Battery Chargers
Product Introduction
Explains battery damage prevention and suitability for marine/mobile applications.
Key Features
Lists features like PFC, multiple outputs, advanced charging algorithm, and silent design.
Battery Temperature Compensation
Automatic adjustment of charging based on battery temperature for optimal results.
Voltage Compensated Charging
Compensates for cable voltage drop to ensure correct charging voltage and current delivery.
Adjustable Charging Current
User can select charging current based on battery capacity for different battery types.
Starter Battery Charging
Provides a dedicated slave charger for starter batteries, up to 3A.
Special Silent Design Features
Describes fan behavior for quiet operation and manual silent mode activation.
Technical Diagrams and Naming
Principle Diagram
Illustrates the internal components and signal flow of the battery charger.
Model Naming Rules
Explains the systematic naming convention for different BS battery charger models.
Product Dimensions
Dimensions for BS1225/BS1240 Series
Provides detailed physical dimensions for BS1225-3, BS1240-3, BS2412-3, BS2420-3 models.
Dimensions for Optional RBS
Shows the physical dimensions of the optional remote control RBS unit.
Installation Procedures
BS Unit Mounting Options
Instructions and diagrams for vertical wall mounting and horizontal surface mounting of the BS unit.
BS1210 Mounting Details
Specifies hole size and required clearance for installing the BS1210 model.
RBS Mounting Methods
Details how to install the optional remote control RBS using surface or wall mounting.
Operating the BS Smart Battery Charger
Front Panel Layout and Indicators
Identifies LEDs and controls on the front panel for BS1225/BS1240 models.
Front Panel LED Status Meanings (BS1225/BS1240)
Comprehensive guide to LED colors and patterns indicating status and settings.
Front Panel Operation (BS1210)
Explains LED indicators and labels for the BS1210 model during operation.
Side Panel Connections and Controls
Side Panel Connections (BS1225/BS1240)
Details input, starter battery, output, sensor, monitor, and setting connectors.
Side Panel Connections (BS1210)
Identifies input, service battery, sensor, and setting connections for BS1210.
Charger Configuration
Configuration Steps
Step-by-step guide on how to set battery type, output current, and working modes.
Configuration Examples (BS1225/BS1240)
Visual examples demonstrating how to configure charging current, battery type, and power supply.
Configuration Examples (BS1210)
Visual examples illustrating the configuration of charging status, battery type, and power supply.
FAQ and Troubleshooting
Fault Indicator LED Guide
Explains LED flash patterns for common faults like over voltage, over temperature, and short circuits.
Optional Remote Control RBS
RBS Overview and Interface
Introduces the optional RBS, its LEDs (Power, Charge, Fault), and buttons (Silent, Power).
RBS LED and Button Functions
Details the meaning of RBS LEDs and the operation of its power and silent buttons.
Technical Specifications
Specifications for BS1225/BS1240 Series
Comprehensive technical data including electrical, protection, and physical characteristics.
Specifications for BS2412/BS2420 Series
Detailed technical specifications for BS2412, BS2412-3, BS2420, BS2420-3 models.
Specifications for BS1210 Model
Technical specifications for the BS1210 battery charger, including electrical and physical data.
Need help?
Do you have a question about the BS1240-3 and is the answer not in the manual?
Questions and answers