Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Xinje XP3-18T
Summarization of Contents
Preface
Manual purpose
Outlines the manual's objectives and content for users, including product characteristics and usage methods.
Scope
Defines the specific product series (XP/XMP) the manual applies to.
Safety notice
ATTENTION
Highlights important operational precautions and warnings to prevent system errors or damage.
DANGEROUSNESS
Emphasizes critical safety warnings related to electrical hazards and proper handling.
1. Summarization
1-1. Product summarization
Provides a concise overview of the XP/XMP-18 series controller features and integration.
1-2. Specs
Lists the key technical specifications and features of the product.
1-3. Parts explanation
Details the physical components, connectors, and interface elements of the controller.
1-4. Outline dimension
Presents the physical dimensions and mounting cutout specifications.
1-2. Specs
General Specs
Covers electrical, environmental, configuration, and port specifications.
HMI Specs
Characteristic
Details the display characteristics, resolution, and touch mode of the HMI.
1-3. Parts explanation
Configuration
Illustrates the controller's physical layout and key component naming.
Communication port
RS-485 com port
Details the RS-485 communication port and its function for connecting devices.
2. In-out specs and exterior layout
2-1. Input specs
Specifies input voltage, current, response time, signal format, and connection details.
2-2. Relay output specs and circuit
Relay output specs
Lists specifications for relay output types, load capacity, and response times.
Relay output circuit
Explains the circuit configuration, operation, and connection examples for relay outputs.
2-3. Transistor output specs and circuit
High speed pulse output
Covers specifications for high-speed pulse transistor outputs.
Normal transistor output
Lists specifications for standard transistor outputs and their circuit.
3. PLC function and application
3-1. PLC instruction
Details the available PLC instructions, including standard and special function sets.
3-3. Set up a project
About the software
Introduces the PLC program editing software (XCPPro) and its interface.
Compile the program
Explains the process of compiling the PLC program using the editing software.
Download the program
1. Connection
Guides on establishing a successful PC to PLC connection for program transfer.
2. Download the program
Details the steps for downloading the PLC program to the device via serial port.
Upload the program
Describes how to upload an existing PLC program from the device to the PC.
3-4. communication function
Communication port
Explains the available communication ports (Program port and RS-485) and their uses.
RS-485 com port
Communication parameter
Lists parameters for Modbus and free format communication modes.
Parameter setting
Guides on configuring communication port parameters for serial communication.
Modbus communication
Communication address
Maps soft component addresses to Modbus addresses for communication.
4. HMI function and application
4-1. HMI function introduction
Introduces the HMI interface and explains the function of each key-press.
4-2. Build a project
About the software
Introduces the HMI editing software (OP20) used for project development.
Build a project
Build a new project
Steps for creating a new HMI/PLC project using the software.
Choose display type
Guides on selecting the correct HMI display model for the project.
Select PLC type
Details how to select the connected PLC type within the project setup.
Screen download
1. Select com port
Guides on selecting the correct serial communication port for screen download.
2. download
Steps for downloading the HMI screen configuration to the device.
5. The extension ability of XP/XMP
5-1. Extend BD board
Explains how to extend controller functionality using BD boards for analog I/O.
5-2. Extend MA model
MA model type
Lists available MA model types and their functions for extension.
MA model specs
Details the specifications for various MA models used for extension.
Need help?
Do you have a question about the XP3-18T and is the answer not in the manual?
Questions and answers