d. Remove 4 screws (1) and then pull out the driver. (Fig. 2)
e. Disconnect the connector connected to the terminal of
the Driver. (Fig. 2)
Driver
2. Removal of bottom panel ass'y
a. Remove 2 screws (2) and then remove 2 legs. (Fig. 3)
b. Remove 12 screws (3). (Fig. 3)
* Screws (3) are identified with arrow marks (
c. Pull out the bottom panel ass'y. (Fig. 3)
d. Remove CB1-5 and then remove the bottom panel
ass'y. (Fig. 3)
MAIN (1) P.C.B.
CB5
CB3
CB1
CB2
CB4
1
Fig. 2
).
MAIN (2) P.C.B.
Fig. 3
YST-FSW150/YST-FSW050
1
2
3
3
Leg
2
3
Bottom panel ass'y
2
Leg
3
9