Related Manuals for Launch TLT240SC
Summarization of Contents
1. Outline
1.1 Model Description
Details the different models of two-post lifts available, including their type and capacity.
1.2 Purpose
Explains the intended application and suitability of the lift for various vehicles.
1.3 Functions and Features
Highlights the key operational capabilities and design aspects of the lift.
1.4 Technical Specifications
Lists critical technical data such as noise levels, working pressure, and electrical parameters.
1.5 Environmental Requirement
Specifies the necessary environmental conditions for operating and storing the lift.
2. Lift Structure
2.1 Lift structures
Illustrates and lists the different structural configurations of the lift models.
2.2 Main structure principles
Explains the fundamental working principles behind the lift's lifting, balance, and safety mechanisms.
3 Operation Descriptions
3.1 Precautions for vehicle repair work
Outlines critical safety measures to be followed before and during vehicle repair operations.
3.2 Preparation before Operation
Details the necessary steps and checks to perform before starting lift operations.
3.3 Inspection before operation
Specifies essential pre-operation checks to ensure the lift is in safe working condition.
3.4 Lifting the Vehicle
Provides step-by-step instructions for safely raising a vehicle using the lift.
3.5 Lowering the Vehicle
Details the correct procedure for safely lowering a vehicle from the lift.
4 Hydraulic and Electrical System of the Equipment
4.1 Hydraulic System of the Lift
Illustrates and describes the components and working principle of the lift's hydraulic system.
4.2 Electrical System of the Lift
Details the electrical schematics and working principles for both single and three-phase motor configurations.
7. Storage and Scrap
7.1 Storage
Outlines best practices for storing the lift when it is not in use for extended periods.
7.2 Scrap
Guides on the proper disposal of the lift at the end of its service life.
10. Installation
10.1 Important notice
Critical warnings and advice regarding the installation process to prevent damage or injury.
10.2 Installation Procedure
Step-by-step instructions for the physical installation of the lift components.
11. Lift Adjustment
11.1 Preparation before the adjustment
Steps to prepare the lift and environment before performing adjustments.
11.2 Adjustment procedure
Detailed steps for adjusting the lift's mechanisms and systems.
13 Packaging
Appendix: Transportation Guide
Provides essential information and instructions for safely transporting the packaged lift equipment.
Need help?
Do you have a question about the TLT240SC and is the answer not in the manual?
Questions and answers