Related Manuals for Launch TLT240SBA
Summarization of Contents
1. Outline
1.1 Model Description
Describes the different lift models offered by LAUNCH.
1.2 Purpose
Explains the intended use and application of the lift.
1.3 Functions and Features
Details the key capabilities and design aspects of the lift.
1.4 Technical Specifications
Provides essential performance data and dimensions for the lift.
1.5 Environmental Requirement
Specifies operating conditions like temperature and humidity for the lift.
2. Lift Structure
2.2 Main structure principles
Explains the core mechanisms and operation of the lift's structure.
3 Operation Description
3.1 Precautions for vehicle repair work
Highlights critical safety steps before and during vehicle repair.
3.2 Preparation before Operation
Outlines necessary steps to prepare the lift and workspace before use.
3.3 Inspection before operation
Lists essential checks to ensure the lift is safe and ready for operation.
3.4 Lifting the Vehicle
Provides step-by-step instructions for safely raising a vehicle.
3.5 Lowering the Vehicle
Details the procedure for safely lowering a vehicle.
4 Hydraulic and Electrical System of the Equipment
4.1 Hydraulic System of the Lift
Explains the workings and components of the lift's hydraulic system.
4.2 Electrical System of the Lift
Details the electrical circuits and components of the lift.
6. Repair and Maintenance
Maintenance of hydraulic system
Describes procedures for maintaining the lift's hydraulic oil and components.
7. Storage and Scrap
7.1 Storage
Provides guidance on proper procedures for storing the lift during long periods.
7.2 Scrap
Outlines steps for safely decommissioning and disposing of the lift.
10. Installation
10.1 Important notice
Stresses critical safety and installation requirements before proceeding.
10.2.1 Selecting installation site
Guides on choosing a suitable and safe location for lift installation.
10.2.3 Install the power side column
Provides steps for mounting the primary lift column.
10.2.4 Install the floor plate, top beam
Details the process for connecting structural elements.
10.2.6 Install and adjust the balancing steel cables
Explains how to set up and tension cables for stability.
11. Lift Adjustment
11.1 Preparation before the adjustment
Lists tasks to perform before calibrating the lift's functions.
11.2 Adjustment procedure
Provides step-by-step instructions for adjusting the lift's operation.
13. Safety rules of electrical system
Notice for onsite installation and adjustment of electrical equipment
Provides specific guidance for electrical setup and adjustments.
14 Packing
Appendix: Transportation Guide
Offers instructions and guidelines for safely transporting the packaged lift.
Grease and hydraulic oil for lift
Lithium Based Lubrication Grease
Details specifications and quality index for the recommended grease.
N32 Hydraulic Oil for Low Ambient Temperature
Specifies quality index for hydraulic oil used in colder conditions.
N46 Hydraulic Oil for High Ambient Temperature
Specifies quality index for hydraulic oil used in warmer conditions.
Warranty
Disclaimer
Clarifies limitations and liabilities related to the warranty.
Order notice
Customer service
Provides contact information and procedures for seeking technical support or repairs.
Need help?
Do you have a question about the TLT240SBA and is the answer not in the manual?
Questions and answers