Using Alarms; Adjusting The Volume; Setting The Clock - Logitech 984-000049 - Pure-Fi Dream Speaker Sys User Manual

adjusting the Volume

To adjust the system volume:
1. Use the volume dial (
To mute the volume:
1. Press / on the remote.
note:
• When listening to the iPod, pressing
the iPod.

Setting the Clock

When turned off, Pure-Fi Dream
To activate the large clock display while Pure-Fi Dream™ is on:
1. Tap select ( ) several times until the large clock display appears.
to set the current time:
1. Press and hold the time set button for 1 second.
2. Use the tuning dial (
remote to change the time. Press select (
accept the change.
note:
• When viewing other display screens (such as the iPod track display or radio frequency), the clock is
displayed in the upper-left corner of the display.
Using the alarms
Your Pure-Fi Dream includes two separate alarms.
™
To enable an alarm (if off): press alarm 1 (
or alarm 2 ( ). This will also show you the alarm time.
2
To disable an alarm (if on): press alarm 1 (
note:
• The current state of each alarm is shown on the display. If an alarm is enabled, the alarm number
will appear next to an alarm bell.
) or the - / + buttons on the remote.
/ will also pause
will display the current time in a large screen format.
™
) or the buttons on the
) to
)
1
) or alarm 2 (
1
volume
Volume
iPod
clock
2:30
2 ).
PM
8
English