Asus PCI-DA2200 User Manual page 78

The drives can be tagged for inclusion by positioning the cursor on
the drive and then pressing [Enter] to select. An asterisk (*) will
appear on the drive that has been selected. Press [ESC] when done.
To limit the capacity of each drive included in the logical drive, select
"Maximum Drive Capacity", and then enter the maximum capacity
that will be used by each drive.
You can assign a Local Spare Drive by choosing "Assign Spare
Drives" in the above screen. A list of available drives will be
displayed on the screen. Mark an asterisk (*) on the drive(s) that will
be assigned by moving the cursor bar to that device, then pressing
[Enter]. Press [ESC] when done.
To exit this menu, press [ESC].
A prompt to confirm the changes will appear. Select Yes to create the
logical drive, or No to cancel.
8-12
ASUS PCI-DA2200 User's Manual