Bios Configuration Utility; Configuration - Asus PCI-DA2200 User Manual

Chapter 7
At system bootup, the ASUS PCI-DA2200 BIOS displays the
following message:
ASUS PCI-DA2200 (PCI-TO-SCSI RAID) BIOS v1.17B
PCI Bus # = 00
!! Press <Ctrl><I> for Configuration Utility, <Q> to Skip !!
PCI Bus#, Device #:
Port :
IRQ :
EDORAM :
FW :
The ASUS PCI-DA2200 BIOS waits 3 seconds for a keystroke. You
can press [Ctrl-I] to enter the configuration utility, or press Q to skip
waiting for a keystroke.
If [Ctrl-I] is pressed to enter configuration utility, the main menu will
appear. There are two functions in the main menu: Configuration and
Color/Monochrome.
7.1

Configuration

There are five functions in the Configuration Option: Configure BIOS,
Configure Card, Configure SCSI, Configure RAID and Reset to
Defaults.
ASUS PCI-DA2200 User's Manual

BIOS Configuration Utility

Device # = 09 Port = E000 IRQ = 10 EDORAM=8 MB FW=2.12
displays the PCI bus and PCI device number that has
been assigned to ASUS PCI-DA2200. The numbers
are in hexadecimal.
shows the I/O port base address that has been
assigned to ASUS PCI-DA2200.
shows the Interrupt level that has been assigned to
ASUS PCI-DA2200. The level is in decimal.
displays the cache RAM type and size that is been
installed on ASUS PCI-DA2200.
shows the firmware version number of ASUS PCI-
DA2200.
7-1