Asus PCI-DA2200 User Manual page 63

Pci-to-ultra2 scsi raid controller
Hide thumbs Also See for PCI-DA2200:
Table of Contents

Advertisement

Support for 3 Disks or More (MS-DOS v5.0 or Above)
For MS-DOS version below 5.0, only supports up to 2 disks, don't set
this option to "Yes" on such versions DOS system.
Support for NOT-ZERO SCSI LUN
Set this option to "Yes", if you want the BIOS to support all SCSI
Target LUNs, 0 to 7.
Configure BIOS Devices
Logical Device SCSI ID
Scanned By BIOS
Logical Device SCSI ID
Scanned By BIOS
If this option is selected, a status list of SCSI devices scanned by BIOS
at BIOS initialization will appear. If a SCSI device is not scanned by
BIOS, then it will not be installed by BIOS.
7.1.2. Configure Card
ISA Emulation Mode IO Port Address
Disk Access Delay on Power-up (Sec)
ISA Emulation Mode
If you are going to use ASUS PCI-DA2200 device driver distributed
by Infortrend, you MUST set the IO port address to "Disabled". You
can select an IO Port address from a list by pressing [Enter].
7.1.3. Configure SCSI
Configuration
Configure BIOS
Configure Card
Configure SCSI
Configure RAID
Reset to Defaults
ASUS PCI-DA2200 User's Manual
#0
Yes Yes Yes Yes Yes Yes Yes Yes
#8
Yes Yes Yes Yes Yes Yes Yes Yes
Color/Monochrome
SCSI Channel 0
SCSI Channel 1
#1
#2
#3
#4
#9
#10 #11 #12 #13 #14 #15
Disabled
15
#5
#6
#7
7-3

Advertisement

Table of Contents
loading

Table of Contents