Configuring A Broadcast Message Notification - Asus PCI-DA2200 User Manual

on how to proceed from here, refer to your Windows
manual.
9. Repeat the same procedure to add the other entries you want.
10. If you want to delete an entry from the address book, select it
from the list box and then click on the Remove button.
11. If you want to modify the settings of a particular entry, select
it and then click on the Properties button.
displayed dialog box, modify the parameters you want.
12. To put the E-mail notification function into effect, start
Microsoft Internet Mail (or your third-party, MAPI-
compliant e-mail service).
5.8 Configuring a Broadcast Message
Notification
The GUI RAID Manager provides a way to notify selected users
on the network by sending broadcast messages to their respective
stations. This notification method only works on Windows NT
stations with the Windows NT Messenger service installed. If
your system does not have these programs, you will not be able
to use this method. In addition to these programs, your station
also needs a network interface card to connect to an existing
network.
configured, and the correct driver is used.
For information on how to configure users for broadcast message
reception in Windows NT and other pertinent information about
this software, refer to the Windows NT manual.
Windows 95/98 systems cannot receive broadcast messages
unless the program
recipient for a broadcast message is a Winodws 95/98 system, it
5.8

Configuring a Broadcast Message Notification

ASUS GUI RAID Manager: Notification Configuration
Be sure that the adapter is properly installed and
WINPOPUP
. is running. If the intended
EXE
From the
5-27