Creating And Deleting Logical Volumes - Asus PCI-DA2200 User Manual

4.11 Creating and Deleting Logical
Volumes
You can create and delete logical volumes from your GUI RAID
Manager station.
combining unassigned logical drives together. You can combine
logical drives with different capacities and RAID levels into one
logical volume. Alternatively, you can delete existing logical
volumes. Before deleting though, be sure that the data stored in
the logical volume is no longer needed.
volume erases all stored information.
NOTE: When you delete a logical volume, all assigned
logical drives to this volume will be released, making them
available again for logical volume creation.
4 4 To create a logical volume
1. Display the Logical Drives and Volume windows.
display the former, click on the Logical Drives command
button or select the Logical Drives command from the Open
menu. To display the Volume window, click on the Logical
Volume command button or select the Logical Volume
command from the same menu.
2. From the Logical Drives window, position the mouse pointer
on the icon of a logical drive you wish to include in creating
the logical volume and press and hold the left mouse button.
3. Drag the icon over to the target logical volume and then
release the mouse button.
4. Repeat steps 2 ~ 3 for the remaining logical drives you want
to include in the logical volume.
5. Double-click the right mouse button on the target logical
volume. The following menu will appear:

4.11 Creating and Deleting Logical Volumes

ASUS GUI RAID Manager: Array Management
Logical volumes are created by simply
Deleting a logical
4-25
To