Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Instron 34TM-5
Summarization of Contents
Chapter 1: Introduction
System Description and Terminology
Explains the system's components, terminology, and layout with diagrams.
System Safety and Information Labeling
Details safety labels, their meanings, and purposes on the testing system.
Conformity with EU Directives
Lists regulatory compliance information for the testing systems.
Product Support and Documentation
Information on obtaining help, manuals, and support resources for the system.
Chapter 2: Risk Reduction and Safe Use
Residual Risks in Testing
Details inherent hazards and influencing factors in materials testing.
Rapid Crosshead Motion Hazards
Addresses crush hazards from rapid crosshead movement.
Pinching Fingers Between Grip Jaw Faces
Explains the pinch hazard associated with grip jaw closing.
Debris from Breaking Specimens
Discusses hazards from flying debris during specimen failure.
Operator Protection Overview
Explains the system's safety features designed to protect operators.
Chapter 3: Installation
Level the Load Frame
Instructions for ensuring the testing machine base is level.
Power Supply Compatibility
Verifies voltage and plug compatibility with the facility's power supply.
System Components Overview
Details the physical components and their interconnections.
Bluehill Operator Dashboard
Covers the installation and adjustment of the control dashboard.
First Time Startup
Outlines the initial configuration and startup process for the system.
Chapter 4: Function of Controls
Power Input Connector
Details the power connector, switch, and fuse access.
Emergency Stop Button
Describes the critical safety function of the emergency stop button.
Frame Control Panel
Details the buttons, indicators, and modes on the frame control panel.
Bluehill Software Functions
Overview of the software's role in controlling tests and analyzing data.
Operator Protection Settings
Explains software-based safety settings for operator protection.
Pneumatic Grips Operation
Instructions for operating pneumatic grips, including safety settings.
Chapter 5: Assemble the Load String
Select a Load Cell
Provides guidelines for choosing a load cell based on test requirements.
Install the Load Cell
Step-by-step instructions for mounting the load cell to the frame.
Adapters and Their Use
Explains the use of base and coupling adapters for interface compatibility.
Select Grips and Fixtures
Guidance on choosing and fitting grips or fixtures for specimen handling.
Preload the Load String
Procedure to eliminate slack and ensure load string integrity before testing.
Chapter 6: Testing Specimens
Testing a Sample Procedure
Detailed steps for running a test on a single specimen or group.
Create a New Sample File
Instructions for creating and configuring sample files in the software.
Calibrate a Transducer
Covers automatic and manual calibration for transducers like load cells.
Set Crosshead Travel Limits
Instructions for setting hardware and software limits for crosshead movement.
Stop a Test
Explains how to stop tests and use emergency stop functions.
Chapter 7: Maintenance
Preventive Maintenance
Outlines periodic inspection, cleaning, and lubrication tasks.
General Maintenance Procedures
Describes user-performable maintenance tasks that don't require a technician.
Troubleshooting Load Cells
Addresses common issues with load cells and lists ancillary parts.
Need help?
Do you have a question about the 34TM-5 and is the answer not in the manual?
Questions and answers