Table of Contents
Advertisement
4. Board installation
Before handling the board, touch a bare metal portion of the system to
discharge static electricity from your body. Wear a wrist strap grounded to the
system chassis when handling the board.
To install the board:
1. Make sure that the system is off.
2. Remove the system cover to access
the RAID connectors on the
motherboard. Refer to the AP1600R
system manual for instructions.
3. Remove the PCI riser card and
bracket assembly by pulling up the
metal lever to release and detach
the assembly from the chassis.
ASUS Zero-Channel RAID Board
PCI Riser Card and Bracket Assembly
Metal Lever
9
Advertisement
Table of Contents
