Table of Contents
Advertisement
5. RAID configuration
The MegaRAID BIOS on your AZCRB board includes the MegaRAID Configuration
Utillity. Use this utility to create and configure disk arrays and logical drives.
The MegaRAID Configuration Utility is independent of the operating system so you
have to start the utility during the Power-On Self-Tests (POST), prior to entering the
operating system.
To start the MegaRAID Configuration Utility:
Turn on the system. During POST, hold the <Ctrl> and press <M> when the following
message appears:
Press <Ctrl><M> to run MegaRAID BIOS Configuration Utility
The MegaRAID BIOS Configuration Utility menu appears. See the menu image on
the next page.
If you do not press <Ctrl><M> within a few seconds after the message, the
system continues with the normal boot procedure.
ASUS Zero-Channel RAID Board
13
Advertisement
Table of Contents
