Table of Contents
Advertisement
3. Use the arrow keys to select a
specific physical drive, then press
the <Space bar> to associate the
selected drive with the current array.
The indicator for the selected drive
changes from READY to ONLIN
Axx-xx.
>> where Axx-xx means:
A[array number]-[drive number]
For example, ONLIN A01-01 means
disk drive 1 in array 1.
If possible, use identical drives (with the same type and capacity) in one array.
If you use drives of different capacities in one array, all the drives are treated
as if they have the capacity of the smallest drive in the array.
4. Follow steps 4 to 12 in section "5.2 Easy Configuration." For instructions on
creating multiple arrays, refer to the MegaRAID Configuration Software
Guide in the support CD.
ASUS Zero-Channel RAID Board
MegaRAID BIOS Config Utility(40-Ld) Ver5.40 Apr 21, 2003 Standard:Adapter-01
New Configuration - ARRAY SELECTION MENU
Channel-1
Channel-2
Management
ID
ID
Configure
0
0
Initialize
ONLIN A01-01
Objects
1
ONLIN A01-02
1
Format
Rebuild
2
ONLIN A01-03
2
Check Consistency
3
3
ONLIN A01-04
4
4
5
5
6
6
Ch-1 ID-0 DISK
17521MB
FUJITSU MAN3184MC
SPACE-Array,ENTER-Configure,F2-Drive Information,F3-Logical Drives,F4-HotSpare
0109
27
Advertisement
Table of Contents
