Table of Contents
Advertisement
Power Configuration
Parameter
Deep Power Off Mode
Power On by RTC Alarm
Restore on AC Power Loss
88
Description
Enables or disables Eut Lot 6 support.
Use this feature to set an event using the Real Time Clock (RTC) to
wake up the system at a specified time.
If this item is set to Enabled, the following items will display.
Date (of Month)
Use this feature to set the date settings for the Real Time Clock
(RTC). You can choose between 1 to 31. The default setting is Every
day.
Time (hh:mm:ss)
Use this feature to set the time settings for the RTC in [00:00:00]
format.
Use this feature to set the power state after a power outage. Select
Power-Off for the system power to remain off after a power outage.
Select Power-On for the system power to turn on after a power outage.
Select Last State to allow the system to resume its last state before a
power outage.
Option
Enabled
Disabled
Enabled
Disabled
Power-On
Power-Off
Last State
Chapter 7
Hide quick links:
Advertisement
Table of Contents
