Related Manuals for Ahlborn ALMEMO 2590-4AS
Summarization of Contents
Operating Controls
Device Inputs and Outputs
Details on measuring inputs (M0-M3) and output sockets (A1, A2).
Power, Display, and Sleep Features
Information on DC power input, sleep LED, and LCD display.
Operating Keys and Battery
Explanation of device keys and battery compartment.
General Information
Warranty Details
Details the product warranty terms and conditions.
Scope of Delivery
Lists the items included in the product package.
Waste Disposal Guidelines
Guidelines for proper disposal of the device and packaging.
Safety Instructions
General Operational Risks
Warnings about life/limb risks and equipment damage.
High Voltage and Explosive Hazards
Specific warnings for high voltage and explosive atmospheres.
Battery Handling Precautions
Instructions for safe battery insertion and handling.
Introduction to ALMEMO Devices
Device Functions Overview
Overview of the ALMEMO® 2590A series device functions.
Sensor Programming
Explains automatic and manual sensor programming.
Value Correction and Scaling
Performing zero-point, gain adjustments, and scaling.
Measuring Operations and Settings
Limit Values and Alarms
Setting and managing alarm limit values.
Measured Value Smoothing
Smoothing unstable measured values using sliding average.
Process Control and Data Logging
Using measured values for process control and data logging.
Operation and Data Management
Device Operation
Using menus, keys, and display for device operation.
Data Output and Networking
Outputting data via interfaces and connecting multiple devices.
Software Utilities
Information on ALMEMO-Control and WINControl software.
Initial Commissioning
Sensor Connection and Power Supply
Connecting sensors and power sources to the device.
Menu Navigation and Key Functions
Accessing menus and understanding key operations.
Memory Output to Computer
Procedure for outputting data to a computer.
Power Supply Options
Battery Operation and Monitoring
Details on battery power and voltage monitoring.
Mains and External DC Operation
How to power the device using mains or external DC sources.
Sensor Power Supply
Information on sensor power supply voltage.
Switching On/Off and Data Buffering
Powering On/Off and Reinitialization
Procedures for powering on/off and reinitializing the device.
Data Storage and Retention
How data is stored and retained during operations.
Connecting Sensors and Transducers
Sensor Connection and Channel Allocation
General information on connecting sensors and channel allocation.
Device-Internal Channels
Explanation of the 4 internal channels and their usage.
Potential Separation
Importance of potential separation in the measuring setup.
Display and Keypad Functions
Display and Menu Navigation
Overview of the display and how to navigate menus.
Measured Value Display and Status Symbols
How measured values and status symbols are shown.
Function Keys and Data Input
Explanation of function keys, softkeys, and data entry.
Keypad Locking
How to lock the keypad to prevent unauthorized changes.
Menu Selection and Navigation
Accessing Main Menu Options
Overview of main menu categories and access methods.
Retrieving Device Information
How to access device information and settings.
Measuring Menus
Sensor Display Menu
The default menu showing sensor and measured data.
Value Correction and Compensation
Performing zero-point, gain, and compensation adjustments.
Temperature and Pressure Compensation
How temperature and pressure affect measurements and compensation.
Cold Junction Compensation and Differential Measurement
Handling cold junction compensation and differential measurements.
Custom Menus and Data Logging
User Measuring Menu Configuration
Configuring custom data logger and bar chart menus.
User Menu Setup
Creating and configuring custom user menus.
Function Menu Details
List of functions available for user menus.
Menu Configuration via PC
How to configure user menus using PC software.
Function Menus
Max/Min/Individual Value Memory
Storing and managing maximum, minimum, and individual values.
Averaging Techniques
Various methods for averaging measured values.
Volume Flow Measurement
Calculating volume flow from velocity and cross-section.
Two-Point Adjustment
Universal error correction using two setpoints.
Data Logging and Memory Management
Data Logger Functions
Functions for acquiring and saving data.
Internal and SD Card Memory
Details on internal EEPROM and external SD card memory.
Cyclic Data Operations
Automated data acquisition and saving cycles.
Memory Management and Scanning
Managing memory capacity, output, clearing, and scan configuration.
Advanced Measurement Modes
Sleep and Monitor Modes
Operating the device in energy-saving sleep or monitor modes.
Data Output Formats and Scan Rates
Defining data output formats and adjusting scan rates.
Starting and Stopping Measurements
Methods for starting and stopping measurements automatically or manually.
Sensor Programming
Selecting Input Channels and Designation
Choosing input channels and assigning measuring point names.
Locking Sensor Programming and Limit Values
Protecting settings and setting channel limit values.
Scaling, Correction, and Units
Adjusting scaling, correction values, and measurement units.
Measuring Range Selection and Sensor Types
Choosing measuring ranges and overview of sensor types.
Advanced Sensor Functions
Function Channels and Arrangement
Details on function channels and channel arrangement on connectors.
Special Ranges, Linearization, and Calibration
Advanced configuration for special ranges, linearization, and calibration.
Special Functions and Limit Value Actions
Configuring relays and alarms for limit value events.
Sensor Control and Output Settings
Controlling Measurements and Analog Output
Using limit values for control and scaling analog output ranges.
Minimum Sensor Voltage and Output Functions
Setting minimum sensor voltage and selecting output values.
Reference Channels and Element Flags
Assigning reference channels and activating element flags.
Device Configuration
Basic Device Settings
Setting time, date, language, illumination, and contrast.
Interface, Address, and Networking
Configuring device address, baud rate, and network settings.
Compensation and Operating Parameters
Setting compensation parameters and general operating settings.
Output Modules
Data Cables and Relay-Trigger Modules
Information on connecting data cables and relay modules.
Relay Assignment and Trigger Inputs
Configuring relay assignments and trigger input sources.
Analog Outputs
Connecting and configuring analog output modules.
Trouble-Shooting
Display and Input Issues
Troubleshooting steps for display, keys, and power supply problems.
Measurement Accuracy Problems
Diagnosing issues with measurement accuracy and system stability.
Interface Communication Errors
Steps to resolve problems with data transmission via interface.
Network Communication Errors
Troubleshooting network data transmission issues.
Appendix
Technical Data
Specifications and technical details of the device.
Product Overview
Summary of device features, options, and accessories.
Need help?
Do you have a question about the ALMEMO 2590-4AS and is the answer not in the manual?
Questions and answers