Table of Contents
Advertisement
SENSOR SETUP
The Sensor setup window allows you to enable, disable and configure Sensors and Relays (Control Outputs).
Associate Sensor w/ PTZ Presets
Open On-Screen Keyboard
Normally Open (NO) /
Normally Closed (NC)
Configure Sensor Response
1.
Click Setup on the Display screen.
2.
Click Sensor.
3.
Click the NO or NC check box to select Normally Open or Normally Closed for the desired sensor.
4.
Enter the Delay time to define the number of seconds after the sensor is tripped until the relay is activated.
5.
Enter the Relays to associate with the sensor. One or more relays can be associated with a single sensor – separate with
commas.
6.
Click Apply.
29597AA
Delay Triggering Relay Output
Configure Hybrid (IP) Sensors*
Assign Relay(s)
comma delineated
45
Advertisement
Table of Contents
