Table of Contents
Advertisement
ADVANCED PTZ SETUP
PTZ signal type
Adjust Speed Settings
Connection Settings
Note
Preset and Tour options may vary depending on the camera
Creating and Viewing Preset Positions
A Preset Position is a user-defined location where the camera can be pointed, zoomed in, and focused. Preset positions can be
defined and labeled if the camera supports this.
Creating a Preset
1.
Inside Setup, click PTZ and select the camera.
2.
If the camera is already selected click Open PTZ Controller.
3.
Move the selected camera to the desired position using the Pan/Tilt/Zoom/Focus controls.
4.
In the Preset & Tour Detail section, choose a Preset # (1-10)
using the list or the Right and Left Arrow buttons and click Select.
Note
Preset positions can also be created using the advanced buttons on the PTZ graphical controller.
Viewing a Preset
1.
From the Display screen select the PTZ camera by clicking on it.
2.
Using the keyboard click the number keys corresponding with the Preset Positions. The camera will move to the saved Preset.
74
Advertisement
Table of Contents
