30
4.5.1
Schedule Setup (Sensor)
1
6
7
Figure 4.5.1
1.
Recording – Toggles to the Recording Window (default).
2.
Sensor – Toggles to the Sensor Window. This window allows you to create schedules for the sensors attached
to the DVR.
3.
Day of the Week – Selects the day of the week for the schedule being made.
4.
Single Selection Mode – Selects all days of the week at once.
5.
Special Day Recording – Allows you to create special recording schedules for specific days.
6.
Recording Schedule Window – Displays and allows you to edit the current Recording Schedule.
7.
Enable/Disable – Enabled the selected Sensor for the time period specified.
8.
Emergency Time – Specifies the amount of time (in seconds) to transmit the video in the Emergency Agent
Software.
9.
Emergency IP – Specifies the IP Address to the send the Emergency Agent video to.
10. Event – Allows you to define Motion as an Alarm Event, whether to transfer the Alarm Event to the SMS Multi-
site Software, and/or whether to send the video to the Emergency Agent software.
2
3
8
9
4
10
5
Figure 4.5.1
KV-KLR Shown