Table of Contents
Advertisement
36
8
Emergency Time – Specifies the amount of time (in seconds) to transmit the video in the Emergency Agent
Software.
9
Emergency IP – Specifies the IP Address to the send the Emergency Agent video to.
10
Event – Allows you to define Motion as an Alarm Event, whether to transfer the Alarm Event to the SMS Multi-
site Software, and/or whether to send the video to the Emergency Agent software.
11
Use – Allows the user to define which Emergency IP Addresses will be alerted.
4.5.1
Schedule Setup (Sensor)
1
6
7
Figure 4.5.1
1
Recording – Toggles to the Recording Window (default).
Sensor – Toggles to the Sensor Window. This window allows you to create schedules for the sensors attached
2
to the DVR.
3
Day of the Week – Selects the day of the week for the schedule being made.
4
Single Selection Mode – Selects all days of the week at once.
5
Special Day Recording – Allows you to create special recording schedules for specific days.
2
3
11
9
4
5
Figure 4.5.1
Sensor Schedule
8
10
Advertisement
Table of Contents
