Table of Contents
Advertisement
H.264 Models
Camera Channel
No. of Recording Frames
Selected
The RED IPS record slider cannot exceed the BLUE PPS capture slider.
Note
The Software will not allow the maximum available Frames to be exceeded.
Note
Frame Select
Blue Slider: Sets the PPS recorded during intensive recording and available for viewing on a remote client PC.
Red Slider: Sets the PPS recorded by the DVR during normal recording.
Resolution
Affects the total number of frames per second that are available.
Video Quality
Lower quality video has a smaller file size but appears more pixilated.
Sensitivity
Sets the Keyframe refresh rate. Adjusting this setting can have negative effects on video quality.
Note
Enable Video Out to Spot Monitor (4 Channel and H.264)
1.
Click Setup on the Display screen.
2.
Click Frame Setup.
3.
Select the Video Out check box to enable the appropriate channels.
4.
Define the Video Out time (seconds to display each channel on spot monitor).
5.
Click Apply.
38
Reset to Default Settings
Frame Select
Do not change the default setting unless instructed by a system administrator.
Display Time of
Selected Channels
Output to Video Out Display
Video Quality
Recording Resolution
Advertisement
Table of Contents
