Table of Contents
Advertisement
Auto Sequence Setting
Auto Sequencing is available either in the Display screen when Auto Sequencing has been enabled or when a Spot-Monitor out signal
is used to display on a spot monitor. Auto Sequencing conveniently displays video channels at specified intervals and sequences
through each selected channel.
Enable Sequencing
Enable All Cameras
Select interval between
switching cameras
Custom Mode
Skip 0 FPS Channel
Create Custom Auto Sequence
1.
Open General setup and click Sequence Setting.
2.
Click individual cameras in the left pane or click Select All to include all cameras in the sequence.
3.
Select an Interval time (in seconds) to display each screen in the sequence.
4.
Select screen division options for appropriate cameras.
29597AA
Create non-standard screen divisions
Sequence skips cameras with no video signal
Screen Division Options
35
Advertisement
Table of Contents
