Setting The Motion Detection Function - Motion Detection Setting Menu - Sony SNC-M1W User Manual

Image file name
Type the file name of the image sent to FTP server up to
10 alphanumeric characters, - (hyphen) and _ (under
score).
Note
You cannot send the audio file by using the periodical
sending function of FTP.
Suffix
Select a suffix to be added to the file name sent to FTP
server.
None: The name of the file sent will be the Image file
name.
Date & time: The date & time suffix is added to the
Image file name.
The date & time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits) and second (2 digits),
thus 12-digit number is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 is added to
the Image file name.
Sequence number clear
Click Clear and the suffix of the sequence number
returns to 1.
OK/Cancel
See "Buttons common to every setting menu" on page
17.
32
Setting the Motion Detection Function — Motion detection setting Menu
Setting the Motion
Detection Function
Motion detection setting Menu
When you click Motion detection on the Administrator
menu, the Motion detection setting menu appears.
You can set the conditions to activate the built-in motion
detection function in this menu.
This is the same menu with the setting menu which is
displayed when you click Motion detection in Send
trigger of e-Mail (SMTP) setting menu.
Note
The motion detection function can activate or be set only
when the Video mode of the camera is set to MPEG4
and the Cropping is set Off.
The Motion detection setting menu is composed of the
following five parts.
Monitor display
You can monitor the moving image and sets the
detection Window.
Window 1 to 4 check box
When you check it, the specified Window is displayed
on the monitor display.
Threshold slider bar
Set the Threshold level so as to judge whether there has
been any motion in the camera image or not.
Motion detection indicator
The moving level of the present shooting image inside
the specified Window is shown.
—