Sending Images To Ftp Server (Jpeg Mode Only); Ftp Client Setting Menu; Setting Tab - Setting The Ftp Client Function; Send Trigger Tab - Setting The Periodical Ftp Sending Mode - Sony SNC-M1W User Manual

Sending Images to FTP
Server (JPEG mode
only)

— FTP Client setting Menu

When you click FTP client on the Administrator menu,
the FTP client setting menu appears.
Use this menu to set up for capturing and sending still
images to an FTP server. By using FTP client function,
you can send the image file periodically.
Setting Tab — Setting the FTP
Client Function
FTP client function
To activate the FTP client function, select On. The FTP
client setting page appears.
When you do not wish to use the FTP client function,
select Off.
Notes
• The FTP client function works when the Video mode
is set to JPEG mode
• The frame rate and operability on the main viewer
may decrease while a file is being transmitted by the
FTP client function.
FTP server name
Type the FTP server name to upload still images up to 64
characters, or the IP address of the FTP server.
User name
Type the user name for the FTP server.
Password
Type the password for the FTP server.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
Passive mode
Set whether you use the passive mode of FTP server or
not when connecting to FTP server. Select On to
connect to FTP server using the passive mode.
OK/Cancel
See "Buttons common to every setting menu" on page
17.
Send trigger Tab — Setting the
Periodical FTP sending mode
You can set to send an image file to FTP server
periodically.
Periodical sending
Select On when you want to use periodical sending. If
you select Off, Periodical sending is not executed.
Note
The Periodical sending function works when the Video
mode is set to JPEG mode.
Interval
Type the interval at which you want to send images to
the FTP server periodically. You can set the hour (H),
minutes (M) and seconds (S) between 1 second and 24
hours (one day).
Note
The actual interval may be longer than the set value,
depending on the image size, image quality setting, bit
rate and the network environments.
Remote path
Type the remote path up to 64 characters.
Sending Images to FTP Server (JPEG mode only) — FTP Client setting Menu
31