Table of Contents
Advertisement
NAMES OF PARTS AND THEIR FUNCTIONS
■ Front and top panel
1
: Press to turn the system on/off.
Time is displayed even when the system is off.
y
• Press and hold
on the top of the unit for more than 3
seconds to set the system to standby mode. All the
information on the front panel display is not displayed
in standby mode. This can reduce power consumption.
To cancel standby mode, press
• Even in system off/standby mode, the alarm function is
available.
2 TIMER: Timer setting (☞ P. 5)
3 ALARM: Alarm on/off (☞ P. 4)
4 SET: Alarm setting (☞ P. 4)
5 Front panel display
6 SOURCE: iPod, AUX, RADIO
7 VOLUME: Volume control
2
En
.
When charging an iPod,
1 Connect the iPod to the transmitter.
2 Set the iPod connected to the transmitter to the
charging cradle.
8 PRESET: Storing your favorite 5 FM and 5 AM
stations (☞ P. 8)
9 SNOOZE/SLEEP (☞ P. 5)
0 DIMMER: Setting brightness of the front panel
A (auto)
3 (brightest)
y
When A (auto) is set, the brightness of the front panel is
adjusted automatically depending on the brightness of the
room.
A MEMORY (☞ P. 7, ☞ P. 8)
B TUNING (☞ P. 8)
C FM, AM: Switching FM/AM
D Charging cradle: For charging an iPod
E Illumination sensor: Measuring surrounding
illuminance. Do not cover this sensor.
2
1 (darkest)
back to A
Advertisement
Table of Contents
