Infrared Remote Control Unit - Sony Ipela NSR-S10 User Manual

D I/O Port
Use this connector to connect audio, sensor inputs, and
relay outputs.
For connection details and wiring diagrams for sensor
inputs, see "I/O Port" (page 64).
E e-SATA connector
Use this connector to connect storage devices that
support the e-SATA interface.
F
LAN connectors (1, 2)
Use these connectors to connect 10 Base-T, 100 Base-
TX, or 1000 Base-T network cables.
The top connector is LAN2, and the bottom connector
is LAN1.
LAN1: Network camera
LAN2: Network camera (LAN2 can only be used
when using a different segment from LAN1.)
CAUTION for LAN ports
For safety reason, do not connect the LAN ports to any
network devices that might have excessive voltage.
Follow the instructions for the above ports.
G 1 Power switch
Press this to turn on the unit.
Note
Although this button can be used to force a shut off of
power to the unit, under normal circumstances the
shutdown command on the screen should be used.
H DC IN connector (12V)
Use this connector to connect the AC adapter.
I Cable clamp hole
Attach the supplied cable clamp here to prevent the
power cord from disconnecting.

Infrared remote control unit

If a button on the infrared remote control unit is pressed
while the remote control unit is pointed at the infrared
sensor on the main unit, then the main unit will perform the
operation corresponding to that button.
A Play button
Use this button to play recorded images.
m (Fast Rewind) button
Use this button for fast rewind. (2x, 4x, 8x, 16x, 32x,
64x speed)
n (Reverse Play) button
Use this button to play recorded images in reverse.
u (Play/Pause) button
During pause: Use this button for playback.
(1x speed).
During playback: Use this button to pause playback.
M (Fast Forward) button
Use this button for fast forward. (2x, 4x, 8x, 16x, 32x,
64x speed)
t (Slow Rewind) button
Use this button for slow rewind. (1/2 speed, 1/4 speed)
c (Previous) button
Use this button to go back one frame.
T (Slow Forward) button
Use this button for slow forward. (1/2 speed, 1/4
speed)
C (Next) button
Use this button to advance one frame.
B LIVE/PB button
Use this button to switch between live image display
and playback of recorded images.
7
Features and Functions