Functions And Operating Procedure Of Webviewer Page - Sony Ipela NSR-S10 User Manual

Functions and Operating Procedure of WebViewer Page

You can monitor images using the same type of operation as on the "Main" screen of the NSR. In addition, you can also
use the menu that appears when you right-click on the monitor frame.
A Layout switch
Switches the layout of the monitor frames.
: This button switches the screen layout to 1 × 1
(1 screen).
: This button switches the screen layout to 2 × 2
(4 screen).
(Record)
B
This records live images.
To start recording, select the monitor frame in which the
image from the camera is being displayed, and then click
this button. To stop recording, click this button again.
appears in the upper left corner of the monitor frame
while recording is in progress.
The image is saved in an AVI-format file (.avi).
When motion detection is active,
upper left corner of the monitor frame.
Note
WebViewer does not record audio. To record audio, do so
from the NSR-S10/S20 unit.
30
Overview
C
This exports one scene of recorded images as a still image
file.
Still images are exported in bitmap (.bmp) format.
D Direct Draw
Displays a cleaner version of the image from the web
camera.
E Display Information
This displays the bandwidth (the amount of bandwidth
used for transferring images over a network connection)
and the frame rate.
F
also appears in the This displays the current layout (monitor arrangement)
over the whole screen.
To return to the normal display, click the
in the lower right corner of the screen.
You can also return to the normal display by pressing the
Esc key on the keyboard.
G
You can turn the audio output on and off.
When audio output is on,
corner of the monitor frame.
A
(Snapshot)
(FullScreen)
(Remote Audio)
appears in the upper left
B
C
D
E
F
G
H
I
that appears