Playback Screen - Sony Ipela NSR-S10 Quick Start Manual

"Playback" screen
M
L
A Real View
This displays images from cameras in real size (dot by
dot).
This function is only available when the video size of the
camera is 1280 × 720 or higher.
If the entire area of the image is not displayed in Real
View mode, use the pan and tilt buttons to the right to
move the displayed area.
(Find Next)
B
This is used to jump to the next event in the recorded
data.
This function is enabled when using the event search
function.
(Backup)
C
This is used to back up recorded images as files to USB
flash memory, etc.
Caution
Do not connect mass storage devices other than USB
memory devices to the unit.
(Export)
D
This is used to export recorded images as proprietary
format files (.dvr) to USB flash memory.
(Event Search)
E
This is used to search for recorded images based on
event log records (sensor input, movement detection,
loss of video signal, etc.).
16
Window Operations Guide
K
To use the (Find Next) function, deselect
the [Output Event List] check box in the "Event Search
Setting" screen and perform the search.
(Event log)
F
This displays the event/operation/system/network
history.
(Set Segment)
G
This is used to specify the portion of a recorded image
to be exported.
Click this button to set the current playback position as
the start point or end point.
If you want to change the start point and end point after
setting them, click
(Bookmark)
H
This is used to set a bookmark at the current playback
position.
I Playback control buttons
These are used when playing back recorded images.
(Fast Rewind)
Use this button for fast rewind. (2x, 4x, 8x, 16x, 32x,
64x speed)
(Slow Rewind)
Use this button for slow rewind. (1/2 speed, 1/4
speed)
(Previous)
Use this button to go back one frame.
A
B
C
D
E
F
G
H
I
J
again to clear the settings.