Sony Ipela NSR-S10 Quick Start Manual page 3

Installation and Setup Procedure
This document provides general explanations on installation and setup of systems that are constructed as follows.
Step 1
Installation
↓
Step 2
System Startup and Camera
Registration
↓
Step 3
Changing the Display Language
↓
Step 4
Setting the System Date and
Time
↓
Step 5
Preparation for Recording
↓
Settings complete
↓
Step 6
Verification
Here, a local network consisting only of the NSR, cameras, and a client computer (when necessary) such as follows is
used as an example for explanation.
Monitor
Keyboard
Caution
When connecting to an existing network, be sure to read "Connecting to an Existing Network" (page 12) before
connecting the unit to the network.
Notes
• Be sure to read the Safety Regulations in the Installation Manual (separate document) before installing the unit.
• This manual uses screen examples of NSR-S10 in the explanations.
• Prepare devices
• Connect devices
• Connect the AC adapter
Search for cameras and register them automatically at NSR startup.
Continuous recording starts automatically after the cameras are registered.
The factory default setting for the display language is English. If necessary, you can change the display
language.
Set the system date and time according to your region of use.
Configure storage locations for recorded data. (when using e-SATA storage)
• Verify monitoring
• Verify image recording and playback
Network
Mouse
Surveillance cameras
Windows PC
Installation and Setup Procedure
3