Built-In Viewer Settings - JVC VN-C215V4U - Fixed Ip Network Mini Dome Instructions Manual

Operation
Operation of Built-in Viewer
(continued)

Built-in Viewer Settings

The setting window of the built-in viewer will be displayed upon clicking the [Setup] button.
A
Turn Over
B
Title
C
Time
D
Display MD
76
Select On to display the image upside down. When this is set to On ,
inversion processes that are applied may increase the load on the
computer. If the computer's capacity is inadequate, the frame rate will
deteriorate during transmission via TCP and noise will occur due to
losses during packet reception via multicast. To use this feature with
inversion set to On , make sure that you use a computer with adequate
performance, or reduce the processing load by adjusting the Encoding
settings (File Size, Frame Rate, Frame Size). (A Pg. 44)
Select On to display the Camera ID.
The camera ID can be set on the Camera page of the VN-C215V4U unit.
(A Pg. 42)
Select On to display the time.
This indicates the time that is stored in the JPEG data.
Selecting On displays the area for which motion is detected in a
different color.
A
B
C
D
E
F
G
H
I
J
K
L
M
N