JVC VN-C215V4U - Fixed Ip Network Mini Dome Instructions Manual page 19

Mounting
1.
Face the imaging direction mark (j) in the
shooting direction and mount the camera.
2.
Secure the camera in 3 locations.
A
Use a cross slot screw driver to push the
screw head of the ceiling mounting bracket
right in.
B
While holding onto the screwdriver, turn it
approximately 90 degrees in the clockwise
direction. Pull out the screwdriver when it
stops.
C
The ceiling mounting bracket is lodged on the
ceiling and the camera is secured.
Memo ：
● To remove the camera, turn the screw head
of the ceiling mounting bracket (3 locations)
90 degrees in the anti-clockwise direction.
1
Towards the shooting direction
B
A
2
Image adjustment
When the camera is mounted, adjust the image
settings while looking at the actual image.
(A Pg.27 Image adjustment )
Mounting the Dome Cover
After the image adjustment is completed, mount
the dome cover.
Installation is complete when the dome cover is
mounted.
(A Pg.29 Mounting the Dome Cover )
19