JVC VN-C215V4U - Fixed Ip Network Mini Dome Instructions Manual page 32

Setting
IP Address Settings
(continued)
IP Address setting at the computer
Set the computer to an IP address that enables communication with VN-C215V4U.
1.
Click [Start]
● Select in the order of [Control Panel]-[Network Connection]-[Local Area].
2.
The computer with which Internet Explorer is launched automatically selects the connected
network
● Right-click and select [Properties].
● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check
boxes are selected.
3.
Select [Internet Protocol(TCP/IP)] and click [Properties].
4.
Set the IP address
5.
Click [OK] on the [Local Area Connection Properties] screen
32
A
Select [Use the following IP adress].
B
Set the [IP Address]. (For example, use
192.168.0.100 when VN-C215V4U is in its
default settings)
Memo ：
● Make sure that you take note of the original
IP address before altering.
Note ：
● When setting, ensure that a duplicate IP
address is not used within the same
network environment.
C
Set [Subnet Mask] to a value that is
appropriate for the setting operation. Clarify
with the network administrator if you have any
queries.
(Use 255.255.255.0 when the camera is in its
default settings)
D
When a [Default Gateway] is present, make use
of the IP address (e.g., 192.168.0.254).
E
Click [OK].