Table of Contents
Advertisement
OSD SETTINGS
If SHUTTER/AGC is set to MANUAL, the submenu is shown as below. The shutter
speed is a variable from 1/50(1/60)sec to 1/10000sec and the AGC is selectable
depending on your environment condition.
Recommended settings according to the application:
1. Auto Exposure by Iris Control:
• Application: General Purpose, Indoor surveillance. This is default settings.
• LENS: AUTO
• SHUTTER/AGC: AUTO
• HIGH LUMINANCE MODE: AUTO IRIS
2. Auto Exposure by AES first, then by IRIS Control:
• Application: Outdoor, Traffic surveillance
• LENS: AUTO
• SHUTTER/AGC: AUTO
• HIGH LUMINANCE MODE: SHUT AUTO IRIS
3. Auto Exposure by Iris Control with fixed Shutter Speed:
• LENS: AUTO
• SHUTTER/AGC: MANUAL
• SHUTTER 1/50 (1/60) ~ 10000
After this, the following are set
• SHUTTER/AGC: AUTO
• HIGH LUMINANCE MODE: SHUT+AUTOIRIS
3.3 WHITE BAL
WHITE BALANCE controls color on the screen. Options include ATW (Auto White
Balance), PUSH, PUSH LOCK, USER1, USER2, ANTI CR (Anti Color Rolling
Suppression) and MANUAL. The default is ATW.
• ATW: Select ATW when the scene illumination varies between indoor scenes and
outdoor scene lighting.
• MANUAL: You can manually adjust the LEVEL from 15 to 69.
• USER1/USER2: You can adjust blue setting (B-GAIN) and red setting (R-GAIN)
value from 0 to 255.
MODE
SHUTTER
AGC
SPEED
DELAY CNT
ATW FRAME
ENVIRONMENT
11
SHUT+AGC
1/50(1/60)
6.0
171
152
X0.50
INDOOR
Advertisement
Table of Contents
