Others; About White-Spot Correction - JVC TK-C205 Instructions Manual

Hide thumbs Also See for TK-C205:
Table of Contents

Advertisement

Available languages

Available languages

Others

About White-spot correction

As a general characteristic unique to CCD, white spots may appear on the screen when
operating under high temperature.
In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature.
FOCUS ADJ.
OFF
OFF
OFF
AUTO
LL
PHASE
R
SPOT
CORRECTION
Memo:
• The white-spot correction feature of this unit does not guarantee the correction of all
white spots.
Maximum correction: less than 16 ~ 32 spots
Depending on the characteristic of white spots, correction may not be possible.
• When performing white-spot correction, accurate data may not be achieved in case of
highly-detailed pixels since correction is made using the information of surrounding
pixels.
• The result of white-spot correction is maintained until the next correction is performed.
ON
ON-AGC
ON-BLC
MANU
INT
WHT.BAL.
B
RESET
Usage
1.
Remove the dome cover.
• Switch on the camera power supply
and wait for at least 30 minutes.
2.
Cover the lens surface using a black
sheet of paper, etc. so that light does
not enter the lens.
3.
Press and hold the SPOT CORRECTION
button on the unit for more than 2
seconds.
• White-spot correction will start.
Correction may take several seconds
for completion.
E-15

Advertisement

Table of Contents
loading

Table of Contents