SL1000 User's Guide
2.3
Errors shown on the Personal Computer Screen
Error message
SL-Touch Error
Cannot find the Scanner.
Connect the Scanner to the PC, install the
driver, then boot up the software.
SL-Touch Error
Turn OFF the Power Switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
SL-Touch Error
CCD Board Error.
Turn OFF the Power Switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
SL-Touch Error
Zoom Motor Error.
Turn OFF the Power Switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
SL-Touch Error
Focus Motor Error.
Turn OFF the Power Switch of the Scanner,
and turn it ON again.
Restart the Personal Computer.
5-4
・Start the application after connecting the Scanner
with the Personal Computer, and installing the
driver.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
• After confirming that the USB Cable is properly
connected, turn ON the Power Switch of the
Scanner again and restart the computer.
Action