Related Manuals for DYNACO Stereo 410
Summarization of Contents
About This Manual
Who Should Attempt This Project?
Identifies the required skills and experience for the project.
Tools Required for Installation
Lists the necessary tools and equipment for the RCA jack replacement.
Project Overview and Goals
Briefly outlines the steps involved in the RCA jack replacement project.
Important Safety Notes
Details crucial safety precautions to prevent injury during the procedure.
Component Information
Mentions the company's right to make design changes without notice.
Recommended Solder Type
Specifies the type and diameter of solder recommended for assembly.
Product Warranty Details
Explains the terms and conditions of the kit's warranty.
Building the New RCA Jack Assembly
Preparing the RCA Jacks
Instructions for bending RCA jack ground lugs and assembling them to the PCB.
Securing RCA Jacks to PCB
Details on how to tighten nuts to secure RCA jacks, ensuring a snug fit.
Removing the Old RCA Jack Assembly
Disconnecting the Heatsink Assembly
Steps to separate the heatsink assembly from the amplifier body.
Removing Cover and Shield Screws
Guides on removing perforated cover, shield, and side mounting screws.
Removing Bottom Mounting Screws
Details on removing the nine screws located on the bottom of the chassis.
Detaching Old RCA Jacks
Instructions for removing screws, nuts, and washers holding the old RCA jacks.
Installing the New RCA Jack Assembly
Connecting Wires to New Jacks
Explains how to connect the amplifier's wires to the new RCA jack terminals.
Soldering RCA Jack Connections
Provides guidance on soldering the prepared wires to the new RCA jack connections.
Mounting the New Jack Assembly
Details on positioning and fastening the new RCA jack assembly to the heatsink.
Reassembling the ST400
Reattaching the Heatsink Assembly
Instructions for carefully reinserting the heatsink assembly into the chassis.
Reinstalling Shields and Cover
Guides on reinstalling the transformer shield and the perforated metal cover.
Finalizing the Installation
Concludes the process by returning the ST400 to operational status.
Need help?
Do you have a question about the Stereo 410 and is the answer not in the manual?
Questions and answers