Installation; Mounting The Camera; Mounting Directly To A 4S Electrical Box - Honeywell HD14C4HR6 Installation Manual

Installation

Your HD14 camera is weather-sealed for indoor or outdoor locations. The wiring
can be completely concealed for maximum vandal and tamper resistance.

Mounting the Camera

The HD14 camera is designed to be flush or surface mounted on a wall or ceiling.
Your HD14 comes with an adapter plate that can be used to provide the most
flexible mounting options.

Mounting Directly to a 4S Electrical Box

1. Follow Figure 1
2. The optional adapter plate can be used to cover ceiling or wall imperfections
around the electrical box opening. Secure the optional adapter plate to the
4S electrical box using appropriate screws (not supplied).
3. Secure the HD14 base with #8-32 x 3/8 inch machine screws (not supplied).
Figure 1
Rev 1.01
to mount the HD14 directly to a 4S electrical box.
4S Electrical Box Installation
2
4S electrical box
(not supplied)
Adapter plate (use is
optional)
HD14 base
8-32 x 3/8 inch
machine screws (x3)
Document 900.0342
10/05