Installation; Power Connection; Dc Power Connection - Bosch NBC-255-P Installation And Operation Manual

IP Camera 200 Series
3

Installation

3.1

Power connection

3.1.1

DC power connection

Figure 3.1 DC power connection
1.
2.
3.
When power is supplied to the camera the LED on the bottom-
front of the camera lights. (This LED can be disabled in the
Installer Options menu.)
Note:
The date/time must be synchronized each time after power on.
It is important to ensure that the date/time is correct for
recording. An incorrect date/time setting could prevent correct
recording.
Bosch Security Systems
Slide the plug adapter that matches your outlet socket
onto the supplied power supply.
Insert the power connector jack from the power supply
into the DC12V socket of the camera.
Connect the power supply to either a 230 VAC or a
120 VAC power supply outlet.
Installation and Operation Manual
Installation | en
AR18-09-B003 | v1.1 | 2010.05
15