Bosch NBC-255-P Installation And Operation Manual page 20

20 en | Installation
Figure 3.7 Mounting a camera
1.
2.
3.
4.
5.
AR18-09-B003 | v1.1 | 2010.05
Use three screws to secure the base of the mounting unit
to a wood (Ø3.8 mm, 26 mm deep) or concrete (Ø6 mm,
26 mm deep) surface.
On the mounting unit, loosen the ball-socket adjustment
ring (2).
Adjust the ball-socket so that camera mount is correcrly
aligned for the required angle.
Screw camera onto mount and, when in position, tighten
the locking ring (1) securely.
Tighten the ball-socket adjustment ring (2) securely.
Installation and Operation Manual
120°
120°
3x Ø3.8 mm 3x Ø6 mm
D: 26 mm D: 26 mm
IP Camera 200 Series
27 mm
Bosch Security Systems