IP Camera 200 Series
JPEG stream
Set the parmeters for the M-JPEG stream.
–
–
Note:
The JPEG resolution follows the highest resolution setting
either in stream 1 or stream 2. For example, if stream 1 is VGA
and stream 2 is QVGA, the JPEG resolution will be VGA.
6.4.3
Video
Contrast (0...255)
Adjusts the contrast of the image.
Saturation (0...255)
Adjusts the color saturation; 0 gives a monochrome image.
Brightness (0...255)
Adjusts the brightness of the image..
White balance
–
–
Apply white balance: Hold puts the ATW on hold and saves the
color settings.
R-gain
The red gain adjustment offsets the factory white point
alignment (reducing red introduces more cyan).
G-gain
The green gain adjustment offsets the factory white point
alignment to optimize the white point.
B-gain
The blue gain adjustment offsets the factory white point
alignment (reducing blue introduces more yellow).
Bosch Security Systems
Select the Max. frame rate in images per second (IPS).
The Picture quality slider allows adjustment of the M-
JPEG image quality from Low to High.
ATW: Auto tracking white balance allows the camera to
continually adjust for optimal color reproduction.
In Manual mode the Red, Green, and Blue gain can be
manually set to a desired position.
Installation and Operation Manual
Advanced Mode | en
AR18-09-B003 | v1.1 | 2010.05
43